| PART |
Description |
Maker |
| DNR |
Intelligent Non-Relay Photoelectric Duct Smoke Detector
|
Systemsensor advanced ideas.
|
| AD260 AD260BND-5 AD260AND-0 AD260AND-1 AD260AND-2 |
High Speed, Logic Isolator with Power Transformer SPECIALTY INTERFACE CIRCUIT, PQIP22
High Speed/ Logic Isolator with Power Transformer
High Speed Logic Isolator with Power Transformer
40 MBd five channel digital isolator isolated power for Fieldbus, Microcontroller/peripheral interface and data transmission
|
Analog Devices, Inc.
AD[Analog Devices]
|
| TCIHG TCIHG-S0072 |
Isolator Hybrid Combination
Green 1550(1585)nm Tap Coupler / Isolator Hybrid Combination
|
OPLINK Communications I...
|
| RIF-3-RPT-LDP-24DC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket
|
PHOENIX CONTACT
|
| DSI-253R0.820G DS1-20L1.960G |
810 MHz - 830 MHz RF/MICROWAVE ISOLATOR
1930 MHz - 1990 MHz RF/MICROWAVE ISOLATOR
|
HITACHI METALS LTD
|
| OZ990S OZ990 |
Intelligent manager smart PMU/GRIO
Intelligent Manager Smart PMU/GPIO
MCU CMOS 44 LD 4MHZ 4K EPRM, -40C to 85C, 44-PLCC, TUBE
|
O2Micro
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
|
| RIF-4-RPT-LV-230AC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket.
|
PHOENIX CONTACT
|
| FDJ1028N |
Plug-In Relay; Contacts:DPDT; Contact Carry Current:12A; Coil Voltage AC Max:12V; Relay Mounting:Plug-In; Relay Terminals:8-Pin Octal; Relay Options:Hermetically Sealed; Coil Resistance:72ohm; Contact Carrying Power:1.2W RoHS Compliant: Yes
N-Channel 2.5 Vgs Specified PowerTrench MOSFET
|
Fairchild Semiconductor Corporation
|
| RIF-2-RPT-LDP-24DC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 PDTs. Input voltage: 24 V DC
|
PHOENIX CONTACT
|
| RIF-2-RSC-LDP-125DC |
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DC
|
PHOENIX CONTACT
|
